announce-prefix: "" title-prefix: "" subtitle-prefix: "" action-prefix: "" warn-prefix: "" enable-private-message: command-for-private-message: "" private-message-send: "" private-message-received: "" private-message-player-not-online: "" private-message-sender-equals-receiver: "" reply-info: "" enable-announcement-logs: scheduler: player-announcer:
Note: Automatic scheduled announcement and player announcement don't use announcement's prefixes.
Hi Guest! I've coded this web page to allow you to configure Bungee Announce easier.
Just follow steps below, then copy to your clipboard the raw generated text and past it in your config.yml
file located to plugins/BungeeAnnounce/
.
To do better announcement and messages, your are able to use all these features during your configuration:
When a player wants to communicate, he will do this: /your_command [player] [message].
The following fields support these placeholders:
Maximum: 80
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
You just have to follow this syntax: [interval],[delay]
. If you've no idea what 'interval' and 'delay' means, have a look at this short tutorial: https://github.com/Royalpha/BungeeAnnounce/.../
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want your announcement to be broadcasted through all your network.
Maximum: 80
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.
You just have to follow this syntax: [fadeInTime],[stayTime],[fadeOutTime]
. Put 0,0,0 to ask for the default time.
Don't forget to use color codes and placeholders.
You just have to follow this syntax: [server1],[server2],[server3],[...]
. Put all
if you want the announcement to be broadcasted through all your network.